Filter
Top Products
Quick Step Overview
Chapter 5: Macintosh Network Setup ❖ 5-3
Quick Step Overview
1
Configure the DocuPrint printer for use on an EtherTalk
network from the Control Panel (if necessary). See
page 5-5
for step-by-step instructions.
2
Install the DocuPrint Macintosh Driver per the
instructions provided in the section
“Macintosh Driver
Installation” (page 5-4)
.
3
Select DocuPrint printer and zone (if used) in the Chooser.
4
Print a one-page job from your software application.
5
If you are not able to print, consult the section
“Macintosh Troubleshooting” (page 5-8)
for
information on your network configuration.