Filter
Top Products
4-22 ❖ DocuPrint Technical Information Guide
Quick Check For
CentreDirect External
Print Server (External
Ethernet Adapter)
(NetBEUI)
1
Make sure that the NetBEUI workgroup name set on the
CentreDirect External Print Server is a valid workgroup on
your network. The CentreDirect will not appear on the
network if the workgroup name does not match a valid
workgroup. Print a Configuration Sheet to verify that the
workgroup name is correctly set.
2
Print and Configurtion Sheet and verify that the
"Microsoft Windows Print Services" are enabled on the
CentreDirect.
3
Verify that the Windows workstation has the NetBEUI
protocol correctly loaded and bound to the ethernet
adapter in the workstation.
4
If there are multiple workgroups on your network, make
sure that you look in the correct workgroup for the
CentreDirect. In some cases, this may different from the
workgroup of your workstation. The CentreDirect should
appear in the workgroup listed on the Configuration
Sheet.
5
Verify that your workstation is on the same ethernet
segment as the CentreDirect. The NetBEUI protocol is not
routable.