Filter
Top Products
Windows Troubleshooting
Chapter 4: Windows / Peer-to-Peer Network Setup ❖ 4-21
5
Review the Configuration Sheet and check for these
things:
• NetWare is enabled.
• Frame Type matches the frame type of the desired
fileserver.
To determine your NetWare IPX frame type, type
config at the Novell console screen. On large
networks using multiple IPX frame types, it is
CRITICAL that the frame type be set correctly.
6
Verify that the Primary Server is set. (Primary Server
should have been set during initial queue setup and
installed using CentreWare DP.) If it is not set, use
CentreWare DP to set it and reset the printer.
Setting the Primary Server is extremely important
on large networks.
7
If the above quick checks fail to fix the Network Print
problem, Contact Customer Service.