Filter
Top Products
Setting up APPSOCKET
Chapter 2: Connecting to Your Network ❖ 2-17
Setting up APPSOCKET
To enable or disable the AppSocket protocol, perform the
following steps:
1
Press
Menu Up
or
Menu Down
until you see:
Menus
Ethernet Menu
2
Press
Item Up
or
Item Down
until you see:
Ethernet Menu
AppSocket Enabl
3
Press
Value Up
or
Value Down
until you see:
AppSocket Enabl=
On
or
Off
4
Press
Enter
. You will see:
Ethernet Menu
AppSocket Enabl
5
Press
On Line
. You will see:
Ready
If you are using the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to enable AppSocket.
Use the telnet procedure that is described in the section for
Windows and Unix Operating Systems.