Filter
Top Products
139
MSAP2000 AAM User’s Guide
C HAPTER 24
Commands Overview
This chapter introduces the command line interface and lists the available
commands.
24.1 Command Line Interface
Note: See the web configurator parts of this User’s Guide for background
information on features configurable by web configurator.
Log in MSAP2000 via console port. Go to /Configuration/Digital Module
Setting/MSAP2000 AAM and select item (5) MSAP2000 AAM Console. At the
bottom of the menu, system will request a slot location for the MSAP2000 AAM.
Give the slot location of the MSAP2000 AAM and press “y” or “yes” to enter
MSAP2000 AAM console.
Here’s a MSAP2000 menu sample:
/Configuration/Digital Module Setting/AAM
============================= AAM =============================
(1) List Setting
(2) Modify Setting
(3) List Profile
(4) List Status
(5) AAM Console
(H) Help
Reject to modify setting when system supports NAT
============== (Tab) Next , (Enter) Continue , (Esc) Exit ================
> Location = RT1-1-1 ... Execute (Y/N) >
You can use text command lines for software configuration. The rules of the
commands are listed next.
1 The command keywords are in courier new font.
2 A command can be abbreviated to the smallest unique string that
differentiates it from other commands. For example the “
sys date” command
could be abbreviated to “
sy d”.
3 The optional fields in a command are enclosed in square brackets [], for
instance, config
[save]
means that the save field is optional.
4 “Command” refers to a command used in the command line interface (CI
command).
5 The | symbol means “or”.
Note: Using commands not documented in the user’s guide can damage the unit
and possibly render it unusable.