Filter
Top Products
182
ras> adsl alarmprofile sho
w
DEFVAL
01. DEFVAL
Thresh15MinLofs (sec): 0 0
Thresh15MinLos (sec): 0 0
Thresh15MinLols (sec): 0 ---
Thresh15MinESs (sec): 0 0
ThreshFastRateUp (bps): 0 0
ThreshInterleaveRateUp (bps): 0 0
ThreshFastRateDown (bps): 0 0
ThreshInterleaveRateDown (bps): 0 0
InitFailureTrap(1-enable, 2-disable): 2 ---
Thresh15MinFailedFastRetrain: 0 ---
Thresh15MinSes (sec): 0 0
Thresh15MinUas (sec): 0 0
ATU-C ATU-
R
---------- - ---------
MSAP2000 AAM User’s Guide
The following example displays the default alarm profile (DEFVAL).
Figure 100 Alarm Profile Show Command Example
26.3.15 Alarm Profile Set Command
Syntax:
adsl alarmprofile set <profile> [<atuc lofs> <atur lofs> <atuc loss> <atur loss> <atuc lols> <atuc
lprs> <atur lprs> <atuc ess> <atur ess> <atuc fast rateup> <atur fast rateup> <atuc interleave
rateup> <atur interleave rateup> <atuc fast ratedown> <atur fast ratedown> <atuc interleave
ratedown> <atur interleave ratedown> <init fail enable> <atuc ses> <atur ses> <atuc uas> <atur
uas>]
where
<profile>
= A name for the alarm profile (up to 31 ASCII characters).
atuc Upstream. These parameters are for the connection (or
traffic)
coming from the subscriber’s device to the MSAP2000
AAM.
atur
Downstream. These parameters are for the
connection (or traffic) going from the MSAP2000
AAM to the subscriber’s device.
<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
= The number of Loss Of Frame Seconds that are
permitted to occur within 15 minutes.
= The number of Loss Of Signal Seconds that are permitted
to occur within 15 minutes.
= The number of Loss Of Link Seconds that are permitted to
occur within 15 minutes
= The Number of times a Loss of PoweR is permitted to occur
(on the ATUR) within 15 minutes.