Filter
Top Products
151
Use join/leave to add/ remove
multicast MAC addresses (up to ten)
on specified ADSL ports, a range of
ADSL ports or all ADSL ports. MAC
exam
p
le: 01005E010203
MSAP2000 AAM User’s Guide
Table 58 Commands (continued)
COMMAND DESCRIPTION
port <port> Sets the external RADIUS server
port number.
secret <secret> Sets the authentication and encryption
key.
profile
show
Displays the local profiles.
set <name> Creates or edits a local profile.
<password>
delete <name> Removes a local profile.
enet
show
Displays the Ethernet port settings.
speed <portlist> Sets the Ethernet port(s) connection
<10copper|100co speed.
pper|auto>
name <portlist>
Sets the Ethernet port(s) name.
<name>
enable <portlist>
Turns on the specified Ethernet
port(s).
disable <portlist>
Turns off the specified
Ethernet port(s).
smcast Use the static multicast filter to
pass routing protocols, such as
RIP and OSPF.
show Display all MAC addresses joined to
ADSL ports.
set <adsl_port>
<mac>
<join|leave>
delete <mac> Removes a static multicast filter entry
by deleting the associated MAC
address.
isolation
show Displays the subscriber isolation
feature’s current setting.
enable Turns the subscriber isolation feature
on.
disable Turns the subscriber isolation feature
off.
daisychain Sets the device to daisychain mode.
standalone Sets the device to standalone mode.
showall [nopause] Displays all of the MSAP2000 AAM’s
switch configuration.
ip