Filter
Top Products
163
MSAP2000 AAM User’s Guide
This command displays the system’s current date.
An example is shown next.
Figure 83 Date Show Command Example
ras> sys date show
current date is Thu 1970/01/01
25.2.15 Date Set Command
Syntax:
sys date set <yyyy> <mm> <dd>
This command sets the system’s date.
An example is shown next.
Figure 84 Date Set Command Example
ras> sys date set 2005 04 28
25.2.16 Time Server Show Command
Syntax:
sys timeserver show
This command displays the system’s time server settings.
An example is shown next.
Figure 85 Time Server Show Command Example
ras> sys timeserver show
mode : none
server : 0.0.0.0
timezone: utc
25.2.17 Time Server Set Command
Syntax:
sys timeserver set <none>
sys timeserver set <daytime|time|ntp> <ip> <utc[<+|->0100~1200]> [nosync]