Filter
Top Products
203
MSAP2000 AAM User’s Guide
where
<leaveall msec>
= This sets the duration of the Leave All Period timer for
GVRP in milliseconds. Each port has a single Leave
All Period timer. Leave All Timer must be larger than
Leave Timer; the default is
10000
milliseconds.
This command sets the MSAP2000 AAM’s leave all period timer for GVRP in
milliseconds.
Switches join VLANs by making a declaration. A declaration is made by
issuing a Join message using GARP. A Leave All message terminates all
registrations. GARP timers set declaration timeout values.
The following example sets the Leave All Timer to 11000 milliseconds.
Figure 116 GARP Timer Leaveall Command Example
ras> switch garptimer leaveall 11000
27.8.5 VLAN Port Show Command
Syntax:
switch vlan portshow [portlist]
where
[portlist]
= You can specify a single port <1>, all ports <*> or a list of
ports
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,e
net2>.
This command displays the port’s VLAN settings.
The following example shows the settings for ADSL port 1.
Figure 117 VLAN Port Show Command Example
ras> switch vlan portshow 1
port pvid priority frametype gvrp
----- ---- -------- --------- ----
1 1 0 all