Filter
Top Products
150
<portlist>
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
Se
t
s the packet type filte
r
fo
r
a
specific port.
none accepts all packets. This
command disables the
pktfilter
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non- PPPoE
packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
command.
Se
t
s IEEE 802.1
X
to use the local
profiles or an external RADIUS
server for authentication.
Turns on IEEE 802.1
X
fo
r
specific ports.
Turns off IEEE 802.1X for
specific ports.
Sets the IEEE 802.1X port
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication period for specific
ports.
MSAP2000 AAM User’s Guide
Table 58 Commands (continued)
COMMAND DESCRIPTION
delete <port> Removes a MAC filter MAC entry.
<mac> [<mac>
<mac> ...]
pktfilter
See Section 28.13 on page 242 for
how to configure packet filters.
show [portlist] Displays packet type filter settings.
set
pppoeonly <portlist>
dot1x
show [portlist]
Displays IEEE 802.1X settings.
enable Turns on IEEE 802.1X.
disable Turns off IEEE 802.1X.
auth <profile|radius
>
port
enable
<portlist>
disable
<portlist>
control
<portlist>
<auto|auth|unau th>
reauth
<portlist>
<on|off>
period
<portlist>
<period>
radius
show
Displays the external RADIUS server
settings.
ip <ip> Sets the external RADIUS server IP
address.