Filter
Top Products
198
MSAP2000 AAM User’s Guide
Figure 111 IGMP Filter Show Command Example
ras> switch igmpfilter profile show voice
profile index startip endip
------------------------------------------------------------------------
voice 1 224.1.1.10 224.1.1.44
voice 2 0.0.0.0 0.0.0.0
voice 3 0.0.0.0 0.0.0.0
voice 4 0.0.0.0 0.0.0.0
voice 5 0.0.0.0 0.0.0.0
voice 6 0.0.0.0 0.0.0.0
voice 7 0.0.0.0 0.0.0.0
voice 8 0.0.0.0 0.0.0.0
voice 9 0.0.0.0 0.0.0.0
voice 10 0.0.0.0 0.0.0.0
voice 11 0.0.0.0 0.0.0.0
voice 12 0.0.0.0 0.0.0.0
voice 13 0.0.0.0 0.0.0.0
voice 14 0.0.0.0 0.0.0.0
voice 15 0.0.0.0 0.0.0.0
voice 16 0.0.0.0 0.0.0.0
27.3 DHCP Relay Overview
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a DHCP server.
You can configure the MSAP2000 AAM to relay client TCP/IP configuration
requests to a DHCP server and the server’s responses back to the clients. See
the web configurator parts for details on DHCP relay.
27.4 DHCP Relay Commands
Use these commands to configure the DHCP relay feature.
27.4.1 DHCP Relay Server Set Command
Syntax:
switch dhcprelay server <server ip>
where
<server ip>
= The IP address of a DHCP server.
This command adds a DHCP server entry to the list of servers to which the
MSAP2000 AAM relays client
TCP/IP configuration requests.