Filter
Top Products
200
MSAP2000 AAM User’s Guide
27.5.2 Option 82 Disable Command
Syntax:
switch dhcprelay option82 disable
This command turns off the DHCP relay agent information (Option 82) feature.
27.5.3 Option 82 Set Command
Syntax:
switch dhcprelay option82 set <relay info>
where
<relay info>
= Up to 23 ASCII characters of additional information for
the MSAP2000 AAM to add to the DHCP client
TCP/IP configuration requests that it relays to a DHCP
server.
Examples of information you could add would be the
name of the MSAP2000 AAM or the ISP.
This command adds the specified information for the relay agent.
27.6 IEEE 802.1Q Tagged VLAN Overview
See the web configurator chapter on VLAN for more information on VLANs.
There are two kinds of tagging:
1 Explicit Tagging
A VLAN identifier is added to the frame header that identifies the source VLAN.
2 Implicit Tagging
The MAC (Media Access Control) number, the port or other information
is used to identify the source of a VLAN frame.
The IEEE 802.1Q Tagged VLAN uses both explicit and implicit tagging.
27.7 Filtering Databases
A filtering database stores and organizes VLAN registration information useful for
switching frames to and from the MSAP2000 AAM. A filtering database consists
of a static entries (Static VLAN or SVLAN table) and dynamic entries (Dynamic
VLAN or DVLAN table).