Filter
Top Products
148
Enables RSTP on a port.
Disables RSTP on a port.
Sets the specified port’s priority.
Sets the specified port’s path cost.
MSAP2000 AAM User’s Guide
Table 58 Commands (continued)
COMMAND DESCRIPTION
show Displays the RSTP settings.
enable Turns on RSTP. disable
Turns off RSTP. priority
<priority>
Sets the system’s priority.
hellotime <hellotime sec> Sets the hello timer.
maxage <maxage sec> Sets the max age timer.
fwdelay <fwdelay sec> Sets the forward delay time.
port show Displays the Ethernet ports’ RSTP
settings.
enable
<enet1|enet2|*>
disable
<portlist>
priority
<portlist>
<priority>
pathcost
<portlist>
<pathcost>
dhcprelay
show
Displays DHCP relay
settings.
enable Turns on DHCP relay.
disable Turns off DHCP relay.
server <server ip> Sets a DHCP relay server IP
address entry.
option82
enable
Turns on the DHCP relay agent
information (Option 82) feature.
disable Turns off the DHCP relay agent
information (Option 82) feature.
set <relay info> Adds the specified information for the
relay agent.
vlan See Section 28.8 on page 228 for
how to configure Virtual LAN.
show <vlanlist> Displays VLAN settings.
portshow [portlist] Displays the port(s) VLAN settings.
set <vid><portlist> Configures a VLAN entry.
:<F<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N>
...] [name]
enable <vid>
Turns on a VLAN entry.