Filter
Top Products
212
MSAP2000 AAM User’s Guide
where
[portlist]
= You can specify a single ADSL port <1>, all ADSL
ports <*> or a list of ADSL ports <1,3,5>. You can also
include a range of ports <1,5,6~10>.
This command turns off the MAC filtering feature on the specified ADSL port(s) or
on all
ADSL ports if no port is specified.
The following example turns off the MAC filtering feature on ADSL port 5.
Figure 128 MAC Filter Disable Command Example
ras> switch mac filter disable 5
27.11.4 MAC Filter Set Command
Syntax:
switch mac filter set <port> <mac> [<mac> <mac> ...]
where
<port>
= The number of an ADSL port.
<mac> = The source MAC address in "00:a0:c5:12:34:56" format.
This command adds an allowed source MAC address on the specified ADSL port.
The following example adds source MAC address 00:a0:c5:12:34:56 for ADSL port
5.
Figure 129 MAC Filter Set Command Example
ras> switch mac filter set 5 00:a0:c5:12:34:56
27.11.5 MAC Filter Delete Command
Syntax:
switch mac filter delete <port> <mac> [<mac> <mac> ...]
where
<port>
= The number of an ADSL port.
<mac> = The source MAC address in "00:a0:c5:12:34:56" format.