Filter
Top Products
142
MSAP2000 AAM User’s Guide
Table 58 Commands (continued)
COMMAND DESCRIPTION
disable <index> Stops a secured client set
from managing the device.
syslog The syslog feature sends logs to an
external syslog server.
time
show Displays the system’s current time.
set <hh> [<mm> Sets the system’s time.
[ss]]
date
show
Displays the system’s current date.
set <yyyy mm dd> Sets the system’s date.
timeserver
show Displays the system’s time server.
set <none> Sets the system to not use a
time server.
<daytime|time|n tp>
<ip> <utc[<+|-
>0100~1200]>
[nosync]
sync Retrieves the date and time from
the time server.
log
show
Displays the device’s logs.
clear Clears the device’s logs.
wdog
show
Displays the current watchdog
firmware protection feature status
and timer.
COMMAND
Description
set <index> <start ip>
<end ip>[[telnet] [ftp]
[web] [icmp]]
Sets a secured client set: a range of
IP addresses from which you can
manage the device and the protocols
t
hat can be used.
show Displays the syslog settings.
enable Turns on the syslog logging.
disable Turns off the syslog logging.
server <ip> Sets the IP address of the syslog
server.
facility <facility> Set the log facility (1~7) to log the
syslog messages to different files in
the syslog server. See your syslog
pro
g
r
a
m
’
s
docume
n
t
a
ti
o
n
f
o
r
d
e
t
a
ils.
Se
t
s the time service protocol,
time server’s IP address and the
device’s time zone.