Filter
Top Products
224
This command displays and/o
r
erases port statistics.
Displays line performance s
t
atistics
for the current and previous 15-
minute periods.
MSAP2000 AAM User’s Guide
C HAPTER 29
Statistics Commands
This chapter describes the statistics commands.
29.1 Statistics Commands Summary
The following table lists the statistics commands you can use with the
MSAP2000 AAM.
Table 63 Statistics Commands
COMMAND DESCRIPTION
statistics
monitor Displays hardware monitor statistics.
adsl
show [portlist] Displays ADSL port
connection statistics.
linedata <portlist> Displays the line data load per symbol
(tone).
lineinfo <portlist> Displays the statistics of the specified
ADSL ports.
lineperf <portlist> Displays the line quality of
the specified ADSL port.
linerate <portlist> Displays the line rate.
15mperf <portlist>
[count <0..96>]
1dayperf <portlist> Displays line performance statistics for
the current and previous 24 hours.
igmpsnoop Displays IGMP snooping statistics.
rstp Displays RSTP statistics.
vlan [vlanlist] Displays current VLANs.
mac Displays the current MAC
address forwarding table.
port <portlist>
[<vpi>
<vci>]
[clear]
dot1x [portlist] Displays IEEE 802.1X statistics.
enet Displays Ethernet port settings
and statistics.