Filter
Top Products
158 CHAPTER 6: IP SERVICES COMMANDS
History —Introduced in MSS Version 3.0.
Examples — To set the time zone for Pacific Standard Time (PST), type
the following command:
WX1200# set timezone PST -8
Timezone is set to 'PST', offset from UTC is -8:0 hours.
See Also
clear summertime on page 115
clear timezone on page 116
display summertime on page 130
display timedate on page 130
display timezone on page 131
set summertime on page 154
set timedate on page 156
telnet Opens a Telnet client session with a remote device.
Syntax —
telnet {ip-addr | hostname} [port port-num]
ip-addr — IP address of the remote device.
hostname — Hostname of the remote device.
port port-num — TCP port number on which the TCP server on the
remote device listens for Telnet connections.
Defaults — MSS attempts to establish Telnet connections with TCP port
23 by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To end a Telnet session from the remote device, press Ctrl+t or
type quit or logout in the management session on the remote device. To
end a client session from the local WX switch, use the clear sessions
telnet client command.