Filter
Top Products
display 517
WXA30001.Rel 8863722 bytes
Internal Compact Flash Directory (Secondary):
WXA30001.Rel 8862885 bytes
See Also
fver on page 519
version on page 524
display Displays the currently active boot profile. A boot profile is a set of
parameters that a WX switch uses to control the boot process. Each boot
profile contains the following parameters:
Boot type — Either compact flash (local device on the WX switch) or
network (TFTP)
Boot device — Location of the system image file
Filename — System image file
Flags — Number representing the bit settings of boot flags to pass to
the booted system image.
Options — String up to 128 bytes of boot options to pass to the
booted system image
A WX switch can have up to four boot profiles, numbered 0 through 3.
Only one boot profile can be active at a time. You can create, change,
and delete boot profiles. You also can activate another boot profile in
place of the currently active one.
Syntax —
display
Defaults — None.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — To display the currently active boot profile, type the
following command at the boot prompt:
boot> display
BOOT Index: 0