Filter
Top Products
clear boot config 471
Examples — The following command creates an archive of the
system-critical files and copies the archive directly to a TFTP server. The
filename in this example includes a TFTP server IP address, so the archive
is not stored locally on the switch.
WX1200#
backup system tftp:/10.10.20.9/sysa_bak critical
success: sent 28263 bytes in 0.324 seconds [ 87231 bytes/sec]
Table 92 describes the fields in the dir output.
See also:
dir on page 475
restore on page 486
clear boot config Resets to the factory default the configuration that MSS loads during a
reboot.
Syntax —
clear boot config
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Table 91 Output for backup
Field Description
[tftp:/ip
-addr/]fil
ename
Name of the archive file to create. You can store the file locally in the
switch’s nonvolatile storage or on a TFTP server.
all Backs up system files and all the files in the user files area.
The user files area contains the set of files listed in the file section of dir
command output.
critical Backs up system files only, including the configuration file used when
booting, and certificate files. The size of an archive created by this option
is generally 1MB or less.