Filter
Top Products
216 CHAPTER 7: AAA COMMANDS
Usage — To assign a Mobility Profile to a user or group, specify it as an
authorization attribute in one of the following commands:
set user attr mobility-profile name
set usergroup attr mobility-profile name
set mac-user attr mobility-profile name
set mac-usergroup attr mobility-profile name
To enable the use of the Mobility Profile feature on the WX switch, use
the set mobility-profile mode command.
CAUTION: When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local WX switch
database or RADIUS server when no Mobility Profile of that name exists
on the WX switch.
To change the ports in a profile, use set mobility-profile again with the
updated port list.
Examples — The following commands create the Mobility Profile
magnolia, which restricts user access to port 2; enable the Mobility Profile
feature on the WX switch; and assign the magnolia Mobility Profile to
user Jose.
WX1200# set mobility-profile name magnolia port 2
success: change accepted.
WX1200# set mobility-profile mode enable
success: change accepted.
WX1200# set user Jose attr mobility-profile magnolia
success: change accepted.
The following command adds port 3 to the magnolia Mobility Profile
(which is already assigned to port 2):
WX1200# set mobility-profile name magnolia port 3
success: change accepted.
See Also
clear mobility-profile on page 176
display mobility-profile on page 185
set mac-user attr on page 208
set mac-usergroup attr on page 214
set mobility-profile mode on page 217