Filter
Top Products
mkdir 483
Usage — This command completely replaces the running configuration
with the configuration in the file.
Examples — The following command reloads the configuration from the
most recently loaded configuration file:
WX4400# load config
Reloading configuration may result in lost of connectivity,
do you wish to continue? (y/n) [n]y
success: Configuration reloaded
The following command loads configuration file testconfig1:
WX4400# load config testconfig1
Reloading configuration may result in lost of connectivity,
do you wish to continue? (y/n) [n]y
success: Configuration reloaded
See Also
display boot on page 477
display config on page 478
save config on page 487
mkdir Creates a new subdirectory in nonvolatile storage.
Syntax — mkdir [subdirname]
subdirname — Subdirectory name. Specify between 1 and 32
alphanumeric characters, with no spaces.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following commands create a subdirectory called corp2
and display the root directory to verify the result:
WX4400# mkdir corp2
success: change accepted.
WX4400# dir
===============================================================================
file: