Filter
Top Products
set system contact 51
set system contact Stores a contact name for the WX switch.
Syntax —
set system contact string
string — Alphanumeric string up to 256 characters long, with no
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To view the system contact string, type the display system command.
Examples — The following command sets the system contact
information to tamara@example.com:
WX1200# set system contact tamara@example.com
success: change accepted.
See Also
clear system on page 39
display system on page 42
set system location on page 54
set system name on page 55
set system
countrycode
Defines the country-specific IEEE 802.11 regulations to enforce on the
WX switch.
Syntax —
set system countrycode code
code — Two-letter code for the country of operation for the WX
switch. You can specify one of the codes listed in Table 8.
Table 8 Country Codes
Country Code
Australia AU
Austria AT