3Com 3CRWX120695A Webcam User Manual


 
194 CHAPTER 7: AAA COMMANDS
bonded — Enables Bonded Auth™ (bonded authentication). When
this feature is enabled, MSS authenticates the user only if the machine
the user is on has already been authenticated.
protocol — Protocol used for authentication. Specify one of the
following:
eap-md5 — Extensible Authentication Protocol (EAP) with
message-digest algorithm 5. For wired authentication clients:
Uses challenge-response to compare hashes
Provides no encryption or integrity checking for the connection
eap-tls — EAP with Transport Layer Security (TLS):
Provides mutual authentication, integrity-protected negotiation,
and key exchange
Requires X.509 public key certificates on both sides of the
connection
Provides encryption and integrity checking for the connection
Cannot be used with RADIUS server authentication
peap-mschapv2 — Protected EAP (PEAP) with Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAP-V2). For
wireless clients:
Uses TLS for encryption and data integrity checking and server-side
authentication
Provides MS-CHAP-V2 mutual authentication
Only the server side of the connection needs a certificate.
The wireless client authenticates using TLS to set up an encrypted
session. Then MS-CHAP-V2 performs mutual authentication using
the specified AAA method.
pass-through — MSS sends all the EAP protocol processing to a
RADIUS server.
EAP-MD5 does not work with Microsoft wired authentication clients.
method1, method2, method3, method4 — At least one and up to four
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.