3Com 3CRWX120695A Webcam User Manual


 
set dot1x timeout auth-server 437
Examples — Type the following command to set the number of seconds
to 100 before reauthentication is attempted:
WX4400# set dot1x reauth-period 100
success: dot1x auth-server timeout set to 100.
See Also
display dot1x on page 427
clear dot1x reauth-period on page 425
set dot1x timeout
auth-server
Sets the number of seconds that must elapse before the WX switch times
out a request to a RADIUS authentication server.
Syntax
set dot1x timeout auth-server seconds
seconds Specify a value between 1 and 65,535.
Defaults — The default is 30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the authentication
server timeout to 60 seconds:
WX4400# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
See Also
display dot1x on page 427
clear dot1x timeout auth-server on page 426
set dot1x timeout
supplicant
Sets the number of seconds that must elapse before the WX switch times
out an authentication session with a supplicant (client).
Syntax
set dot1x timeout supplicant seconds
seconds Specify a value between 1 and 65,535.
Defaults — The default is 30 seconds.