68 CHAPTER 4: PORT COMMANDS
See Also
■ “clear port type” on page 61
■ “set port” on page 76
■ “set port name” on page 78
■ “set port negotiation” on page 78
■ “set port speed” on page 81
■ “set port type ap” on page 82
■ “set port type wired-auth” on page 86
monitor port
counters
Displays and continually updates port statistics.
Syntax —
monitor port counters
[octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats | transmit-etherstats]
■ octets — Displays octet statistics first.
■ packets — Displays packet statistics first.
■ receive-errors — Displays errors in received packets first.
■ transmit-errors — Displays errors in transmitted packets first.
■ collisions — Displays collision statistics first.
■ receive-etherstats — Displays Ethernet statistics for received
packets first.
■ transmit-etherstats — Displays Ethernet statistics for transmitted
packets first.
Defaults — All types of statistics are displayed for all ports. MSS
refreshes the statistics every 5 seconds. This interval cannot be
Media Link type:
10/100BaseTX — 10/100BASE-T.
GBIC — 1000BASE-SX or 1000BASE-LX GBIC.
1000BaseT — 1000BASE-T.
No connector — GBIC slot is empty.
Table 14 Output for display port status (continued)
Field Description
