Filter
Top Products
clear prompt 39
Examples — To clear the history buffer, type the following command:
WX4400# clear history
success: command buffer was flushed.
See Also
history on page 46
clear prompt Resets the system prompt to its previously configured value. If the prompt
was not configured previously, this command resets the prompt to its
default.
Syntax —
clear prompt
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
WX4400#
See Also
set prompt on page 50. (For information about default prompts, see
“Command Prompts” on page 22.)
clear system Clears the system configuration of the specified information.
CAUTION: If you change the IP address, any currently configured
Mobility Domain operations cease. You must reset the Mobility Domain.
Syntax —
clear system [contact | countrycode | ip-address |
location | name]
contact — Resets the name of contact person for the WX switch to
null.
countrycode — Resets the country code for the WX switch to null.
ip-address — Resets the IP address of the WX switch to null.