Filter
Top Products
182 CHAPTER 7: AAA COMMANDS
See Also
set accounting {admin | console} on page 186
set authentication admin on page 189
set authentication console on page 191
set authentication dot1x on page 193
set authentication last-resort on page 197
set authentication mac on page 199
set authentication web on page 201
author-pass Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username. By
default, a MAC user’s MAC address is also used as that
user’s password, and no global password is set.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the WX switch uses for authentication
messages and for accounting records.
T/o Setting of timeouts on each RADIUS server currently active.
Tries Number of retransmissions configured for each RADIUS
server currently active. The default is 3 times.
Dead Length of time until the server is considered responsive
again.
State Current state of each RADIUS server currently active:
UP (operating)
DOWN (unavailable)
Server groups Names of RADIUS server groups and member servers
configured on the WX switch.
set commands List of commands used to configure AAA on the WX
switch.
user and user group
profiles
List of user and user group profiles stored in the local
database on the WX switch.
Table 38 display aaa Output (continued)