Filter
Top Products
Routing Table Display Commands 137
Only the currently used route, that is the best route, is displayed.
Example
To view a summary of routing table information, enter the following:
<4500>display ip routing-table
The information displays in the following format:
Routing Table: public net
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Vlan-interface1
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Vlan-interface2
2.2.2.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
3.3.3.0/24 DIRECT 0 0 3.3.3.1 Vlan-interface3
3.3.3.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
4.4.4.0/24 DIRECT 0 0 4.4.4.1 Vlan-interface4
4.4.4.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
display ip routing-table
acl
Syntax
display ip routing-table acl acl_number [ verbose ]
View
All views.
Parameters
acl_number Enter the number of the IP ACL, in the range 2000 to 2999.
verbose Enter to display verbose information about both the active and inactive
routes that passed filtering rules. If you do not enter this parameter, the command
only displays a summary of the active routes that passed filtering rules.
Description
Use the display ip routing-table acl command to view the route filtered
through the specified ACL.
This command is used to display the routes that passed the filtering rules in the
specified ACL.
The command only displays routes that passed basic ACL filtering rules.
Table 17 Output Description of the display ip routing-table Command
Field Description
Destination/Mask Destination address/Mask length
Protocol Routing protocol
Pre Routing preference
Cost Cost
Interface Output interface, through which the data packet destined for the
destination network is sent