Filter
Top Products
254 CHAPTER 11: USING AAA AND RADIUS COMMANDS
AAA and RADIUS
Configuration
Commands
This section describes how to use the AAA and RADIUS configuration commands
on your Switch 4500.
access-limit Syntax
access-limit { disable | enable max-user-number }
View
ISP Domain View
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the
current ISP domain, ranging from 1 to 1048
Description
Use the access-limit command to configure a limit to the amount of
supplicants in the current ISP domain.
By default, there is no limit to the amount of supplicants in the current ISP domain.
This command limits the amount of supplicants contained in the current ISP
domain. The supplicants may contend with each other for the network resources.
So setting a suitable limit to the amount will guarantee the reliable performance
for the existing supplicants.
Example
Sets a limit of 500 supplicants for the ISP domain, marlboro.net.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]domain marlboro.net
New domain added.
[4500-isp-marlboro.net]access-limit enable 500
attribute Syntax
attribute { ip ip-address | mac mac-address | idle-cut second |
access-limit max-user-number | vlan vlanid | location { nas-ip
ip-address port portnum | port portnum }
undo attribute {ip | mac | idle-cut | access-limit | vlan | location
}
View
Local User View
Parameter
ip: Specifies the IP address of a user.