Filter
Top Products
290 CHAPTER 11: USING AAA AND RADIUS COMMANDS
Parameter
minutes: Real-time accounting interval, ranging from 3 to 60, measured in
minutes in multiples of 3. By default, the value is 12.
Description
Use the timer realtime-accounting command to configure the real-time
accounting interval. Use the
undo timer realtime-accounting command to
restore the default interval.
To implement real-time accounting, it is necessary to set a real-time accounting
interval. After the attribute is set, NAS will transmit the accounting information of
online users to the RADIUS server regularly.
The value of minutes is related to the performance of NAS and RADIUS server. The
smaller the value is, the higher the requirement for NAS and RADIUS server is.
When there are a large amount of users (more than 1000, inclusive), we suggest a
larger value. The following table recommends the ratio of
minutes value to
number of users.
Related commands: retry realtime-accounting, radius scheme.
Example
To set the real-time accounting interval of RADIUS scheme, “3Com”, to 15
minutes, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]timer realtime-accounting 15
timer response-timeout Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS Scheme View
Parameter
seconds: RADIUS server response timeout timer, ranging from 1 to 10 seconds. By
default, the value is 3.
Table 31 Recommended ratio of minutes to number of users
Number of users
Real-time accounting
interval (minute)
1 to 99 3
100 to 499 6
500 to 999 12
>1000 >15