Filter
Top Products
AAA and RADIUS Configuration Commands 259
idle-cut: Configures to display the local users according to the state of idle-cut
function.
disable means that the user disables the idle-cut function and enable
means the user enables the function. This parameter only takes effect on the users
configured as lan-access type. For other types of users, the
display local-user
idle-cut enable
and display local-user idle-cut disable commands do
not display any information.
service-type: Configures to display local user of a specified type. telnet means
that the specified user type is telnet.
ftp means that the specified user type is ftp.
ssh means the specified user type is ssh. terminal means that the specified user
type is terminal which refers to users who use the terminal service (login from the
console port).
lan-access means that the specified user type is lan-access which
mainly refers to Ethernet accessing users, 802.1x supplicants for example.
state { active | block }: Configures to display the local users in the specified
state.
active means that the system allows the user requesting network service
and
block means the system does not allow the user requesting network service.
user-name user-name: Configures to display a user specified with user-name.
user-name is the argument specifying the username. It is a character string not
exceeding 80 characters.
vlan vlanid: Configures to display the users bound to the specified VLAN.
vlanid is the integer, ranging from 1 to 4094.
Description
Use the display local-user command to view the relevant information of all
the local users or the specified one(s).
This command displays the relevant information about a specified or all the local
users. The output can help you with the fault diagnosis and troubleshooting
related to local user.
Related command: local-user.
Example
To display the relevant information of all the local users, enter the following:
<4500>display local-user
The contents of local user xxx:
State: Active ServiceType Mask:
Idle Cut: Disable
AccessLimit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable
Total 1 local user(s) Matched,1 listed.