Filter
Top Products
70 CHAPTER 2: USING PORT COMMANDS
Example
To enable LACP at Ethernet1/0/1, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]lacp enable
[4500-Ethernet1/0/1]
lacp port-priority Syntax
lacp port-priority port-priority-value
undo lacp port-priority
View
Ethernet Port View
Parameter
port-priority-value: Port priority, ranging from 0 to 65535. By default, it is
32768.
Description
Use the lacp port priority command to configure port priority value. Use the
undo lacp port-priority command to restore the default value.
Related commands: display link-aggregation verbose and display
link-aggregation interface
.
Example
To set port priority as 64, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]lacp port-priority 64
[4500-Ethernet1/0/1]
lacp system-priority Syntax
lacp system-priority system-priority-value
undo lacp system-priority
View
System View
Parameter
system-priority-value: System priority, ranging from 0 to 65535. By default, it
is 32768.
Description
Use the lacp system-priority command to configure system priority value.