Filter
Top Products
280 CHAPTER 11: USING AAA AND RADIUS COMMANDS
radius scheme Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System View
Parameter
radius-scheme-name: Specifies the Radius server name with a character string
not exceeding 32 characters.
Description
Use the radius scheme command to configure a RADIUS scheme group and enter
its view. Use the
undo radius scheme command to delete the specified RADIUS
scheme.
A default RADIUS scheme named system has been created in the system. The
attributes of system are all default values.
RADIUS protocol configuration is performed on a per-RADIUS-scheme basis. Every
RADIUS scheme shall at least have the specified IP address and UDP port number
of the RADIUS authentication/authorization/accounting server and some necessary
parameters exchanged with the RADIUS client end (Switch). It is necessary to
create the RADIUS scheme and enter its view before performing other RADIUS
protocol configurations.
A RADIUS scheme can be used by several ISP domains at the same time. You can
configure up to 16 RADIUS schemes, including the default RADIUS scheme named
as System.
Although undo radius scheme can remove a specified RADIUS scheme, the
default one cannot be removed. Note that a scheme currently in use by the online
user cannot be removed.
Related commands: key, retry realtime-accounting, radius-scheme, timer
realtime-accounting
, stop-accounting-buffer enable, retry
stop-accounting
, server-type, state, user-name-format, retry, display
radius
, display radius statistics.
Example
To create a RADIUS scheme named “3Com” and enter its view, enter the
following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
New Radius scheme
[4500-radius-3Com]
reset radius statistics Syntax
reset radius statistics