Filter
Top Products
194 CHAPTER 8: USING QOS/ACL COMMANDS
View
Ethernet Port View
Parameter
target-rate: The total limited rate of the packets sent by interfaces. Unit in
Kbps. The number input must be a multiple of 64. For 100 Mbps port, the range is
from 64 to 99968; for 1000 Mbps port, the range is from 64 to 1000000.
Description
Use the line-rate command, to limit the total rate of the packets received or
delivered by interfaces. Use the
undo line-rate command, to cancel the
configuration of limit rate at interfaces.
The granularity of line rate is 64 kbps.
Example
Set the rate limitation of interface Ethernet1/0/1 to 128 kbps.
<4500>system-view
System View: return to User View with Ctrl+Z
[4500]interface Ethernet 1/0/1
[4500]line-rate outbound 128
mirrored-to Syntax
mirrored-to { inbound | outbound } { user-group acl-number [ rule
rule
] | ip-group acl-number [ rule rule [ link-group acl-number rule
rule ] ] | link-group acl-number [ rule rule ] } { cpu |
monitor-interface }
undo mirrored-to { inbound | outbound } { user-group acl-number [
rule rule ] | ip-group acl-number [ rule rule [ link-group acl-number
rule rule ] ] | link-group acl-number [ rule rule ] }
View
Ethernet Port View
Parameter
inbound: Performs traffic mirror for the packets received by the interface.
outbound: Performs traffic mirror for the packets sent by the interface.
user-group acl-number: Activates user-defined ACLs. acl-number: Sequence
number of ACL, ranging from 5000 to 5999.
ip-group acl-number: Activates IP ACLs, including basic and advanced ACLs.
acl-number: Sequence number of ACL, ranging from 2000 to 3999.
link-group acl-number: Activates Layer 2 ACLs. acl-number: Sequence number
of ACL, ranging from 4000 to 4999.