Filter
Top Products
Voice VLAN Configuration Commands 85
Description
Use the voice vlan mac_address command to set the MAC address that the
Voice VLAN can control. Use the
undo voice vlan mac_address command to
cancel this MAC address.
Here the OUI address refers to a vendor and you need only input the first
three-byte values of the MAC address. The OUI address system can learn 16 MAC
addresses at most. There are four default OUI addresses after the system starts:
For the related command, see display voice vlan oui.
Example
To set the MAC address 00AA-BB00-0000 as an OUI address, enter the following.
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]voice vlan mac_address 00aa-bb00-0000 mask ffff-ff00-0000
description ABC
[4500]
voice vlan mode Syntax
voice vlan mode auto
undo voice vlan mode auto
View
System View
Parameter
None
Description
Use the voice vlan mode auto command to set the Voice VLAN in auto mode.
Use the
undo voice vlan mode auto command to set the Voice VLAN in manual
mode.
By default, the Voice VLAN is in auto mode.
If required, the voice vlan mode auto and undo voice vlan mode auto
commands must be executed before the Voice VLAN features are enabled globally.
For the related command, see display voice vlan status.
Example
To set the Voice VLAN in manual mode, enter the following:
Table 8 Default OUI Addresses
No. OUI Description
1 00:E0:BB 3Com phone
2 00:03:6B Cisco phone
3 00:E0:75 Polycom phone
4 00:D0:1E Pingtel phone