Filter
Top Products
802.1x Configuration Commands 239
forwarding to the RADIUS server. You can use EAP authentication in one of the
four sub-methods: PEAP, EAP-TLS, EAP-TTLS and EAP-MD5.
To use PAP, CHAP or EAP authentication, RADIUS server should support PAP, CHAP
or EAP authentication respectively.
Related command: display dot1x.
Example
Configure 802.1x user to use PAP authentication
<4500>system-view
System View: return to User View with Ctrl-Z
[4500]dot1x authentication-method pap
dot1x dhcp-launch Syntax
dot1x dhcp-launch
undo dot1x dhcp-launch
View
System View
Parameter
None
Description
Use the dot1x dhcp-launch command to set 802.1x to prevent the Switch from
triggering user ID authentication for users who configure static IP addresses in a
DHCP environment. Use the
undo dot1x dhcp-launch command to allow the
Switch to trigger ID authentication.
By default, the Switch can trigger user ID authentication for users who configure
static IP addresses in a DHCP environment.
Related command: dot1x.
Example
Prevent the Switch from triggering the authentication ID for users who configure
static IP addresses in a DHCP environment.
<4500>system-view
System View: return to User View with Ctrl-Z
[4500]dot1x dhcp-launch
dot1x max-user Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
View
Ethernet Port View