Filter
Top Products
378 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Parameter
groupname: Group name, ranging from 1 to 32 bytes.
Description
Use the display snmp-agent group command to display group name, safe
mode, state of various views and storage modes.
Example
Display SNMP group name and safe mode.
<SW4500>display snmp-agent group
groupname: public
Security model: v2c noAuthnoPriv
readview:v1default
writeview: no writeview specified
notifyview: *tv.FFFFFFFF
storage-type: volatile
The following table describes the output fields.
display snmp-agent
mib-view
Syntax
display snmp-agent mib-view [ exclude | include | viewname mib-view ]
View
All views
Parameter
exclude: Display the SNMP mib view excluded.
include: Display the SNMP mib view included.
viewname: Display the SNMP mib view according to the mib view name.
mib-view: Specify the mib view name.
Description
The display snmp-agent mib-view command is used to view the MIB view
configuration information of the Switch.
Example
Display the information about the currently configured MIB view.
Table 38 Output description of the display snmp-agent group command
Field Description
groupname SNMP Group name of the user
Security model The security model adopted by SNMP
readview Read-only MIB view name corresponding to that group
writeview Writable MIB view corresponding to that group
notifyview The name of the notify MIB view corresponding to that group
storage-type Storage type