Filter
Top Products
320 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
<4500>sys
System View: return to User View with Ctrl+Z.
[4500]local-user-3Com1
New local user added.
[4500-luser-3Com1]service-type lan-access
FTP Client Commands This section describes the File Transfer Protocol (FTP) Client commands on your
Switch 4500.
ascii Syntax
ascii
View
FTP Client view
Parameter
None
Description
Use the ascii command to configure data transmission mode as ASCII mode.
By default, the file transmission mode is ASCII mode.
Perform this command if the user needs to change the file transmission mode to
default mode.
Example
Configure to transmit data in the ASCII mode.
<4500>ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
[ftp]ascii
200 Type set to A.
[ftp]
binary Syntax
binary
View
FTP Client view
Parameter
None