Filter
Top Products
400 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
falling-threshold threshold-value2: Falling threshold, ranging from 0 to
2147483647.
event-entry2: Event number corresponding to the falling threshold, ranging
from 0 to 65535.
owner text: Specifies the creator of the alarm. Length of the character string
ranges from 1 to 127.
Description
Use the rmon alarm command to add an entry to the alarm table. Use the undo
rmon alarm
command to delete an entry from this table.
In this way, the alarm event can be triggered in the abnormal situations and then
decides to log and send trap to the NM station.
Example
Delete the information of entry 15 from the alarm table.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]undo rmon alarm 15
[SW4500]
rmon event Syntax
rmon event event-entry [ description string ] { log | trap
trap-community | log-trap log-trapcommunity | none } [ owner
rmon-station ]
undo rmon event event-entry
View
System view
Parameter
event-entry: Number of the entry to be added/deleted, ranging from 1 to
65535.
description string: Event description. Length of the character string ranges
from 1 to 255.
log: Log event.
trap: Trap event.
trap-community: The community of the Network Management station that the
trap message is sent to.
log-trap: Log and trap event.
log-trapcommunity: The community of the Network Management station that
the trap message is sent to.
none: neither log nor trap event.