Filter
Top Products
Configuring the Switch
3-90
3
CLI – This example globally enables the system authentication control, configures
the session timeout, quiet period and login attempts, and displays the configured
global parameters.
Configuring Web Authentication for Ports
Web authentication is configured on a per-port basis. The following parameters are
associated with each port.
Command Attributes
•Port – Indicates the port being configured
• Status – Configures the web authentication status for the port.
• Authenticated Host Counts – Indicates how many authenticated hosts are
connected to the port.
Web – Click Security, Web Authentication, Port Configuration.
Figure 3-58 Web Authentication Port Configuration
Console(config)#mac-authentication reauth-time 3000 4-127
Console(config)#web-auth system-auth-control 4-134
Console(config)#web-auth session-timeout 1800 4-133
Console(config)#web-auth quiet-period 20 4-133
Console(config)#web-auth login-attempts 2 4-131
Console(config)#end
Console#show web-auth 4-135
Global Web-Auth Parameters
System Auth Control : Enabled
Login Page URL :
Login Fail Page URL :
Login Success Page URL :
Session Timeout : 1800
Quiet Period : 20
Max Login Attempts : 2
Console#