Filter
Top Products
Access Control List Commands
4-145
4
access-list mac
This command adds a MAC access list and enters MAC ACL configuration mode.
Use the no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an existing ACL,
use the permit or deny command to add new rules to the bottom of the list.
To create an ACL, you must add at least one rule to the list.
• To remove a rule, use the no permit or no deny command followed by the
exact text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
Related Commands
permit, deny (4-146)
mac access-group (4-148)
show mac access-list (4-147)
mac access-group Adds a port to a MAC ACL IC 4-148
show mac access-group Shows port assignments for MAC ACLs PE 4-148
Console(config)#access-list mac jerry
Console(config-mac-acl)#
Table 4-40 MAC ACL Commands
Command Function Mode Page