Filter
Top Products
System Management Commands
4-75
4
Example
Related Commands
show sntp (4-67)
clock summer-time (predefined)
This command configures the summer time (daylight savings time) status and
settings for the switch using predefined configurations for several major regions of
the world. Use the no form to disable summer time.
Syntax
clock summer-time name predefined [australia | europe | new-zealand |
usa]
no clock summer-time
• name - Name of the timezone while summer time is in effect, usually an
acronym. (Range: 1-30 characters)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
This command sets the summer-time time relative to the configured time zone.
To display the time corresponding to your local time when summer-time is in
effect, select the predefined summer-time time zone appropriate for your
location, or manually configure summer-time if these predefined configurations
do not apply to your location (see “clock summer-time (date)” on page 4-74 or
“clock summer-time (recurring)” on page 4-76).
Example
Console(config)#clock summer-time DEST date april 1 2007 23 23 april 23
2007 23 23 60
Console(config)#
Table 4-24 Predefined Summer-Time Parameters
Region Start Time, Day, Week, & Month End Time, Day, Week, & Month Rel. Offset
Australia 00:00:00, Sunday, Week 5 of October 23:59:59, Sunday, Week 5 of March 60 min
Europe 00:00:00, Sunday, Week 5 of March 23:59:59, Sunday, Week 5 of October 60 min
New Zealand 00:00:00, Sunday, Week 1 of October 23:59:59, Sunday, Week 3 of March 60 min
USA 02:00:00, Sunday, Week 2 of March 02:00:00, Sunday, Week 1 of November 60 min
Console(config)#clock summer-time MESZ predefined europe
Console(config)#