Filter
Top Products
Command Line Interface
4-104
4
- radius - Specifies all RADIUS hosts configure with the radius-server
host command described on page 4-95.
- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-98.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-102. (Range: 1-255
characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified RADIUS or TACACS+
servers, and do not actually send any information to the servers about the
methods to use.
Example
aaa accounting exec
This command enables the accounting of requested Exec services for network
access. Use the no form to disable the accounting service.
Syntax
aaa accounting exec {default | method-name} start-stop group {radius |
tacacs+ |server-group}
no aaa accounting exec {default | method-name}
• default - Specifies the default accounting method for service requests.
• method-name - Specifies an accounting method for service requests.
(Range: 1-255 characters)
• start-stop - Records accounting from starting point and stopping point.
• group - Specifies the server group to use.
Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#