Filter
Top Products
System Management Commands
4-33
4
Command Usage
The user-entered data cannot contain spaces. The banner configure
equipment-info command interprets spaces as data input boundaries. The
use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where whitespace is necessary for clarity.
Example
banner configure equipment-location
This command allows the administrator to configure the equipment location
information displayed in the banner. Use the no form to remove the equipment
location information from the banner display.
Syntax
banner configure equipment-location location
no banner configure equipment-location
location - The address location of the device. (Maximum length: 32
characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
The user-entered data cannot contain spaces. The banner configure
equipment-location command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is
suggested for situations where whitespace is necessary for clarity.
Example
banner configure ip-lan
This command allows the administrator to configure the device IP address and
subnet mask information displayed in the banner. Use the no form to remove the IP
and subnet information from the banner display.
Syntax
banner configure ip-lan ip-mask
no banner configure ip-lan
Console(config)#banner configure equipment-info manufacturer-id
ES3528M-SFP floor 3 row 10 rack 15 shelf-rack 12 manufacturer Edgecore
Console(config)#
Console(config)#banner configure equipment-location
710_Network_Path,_Indianapolis
Console(config)#