Filter
Top Products
Spanning Tree Commands
4-217
4
Related Commands
upnp device ttl (4-216)
show upnp
This command displays the UPnP management status and time out settings.
Command Mode
Privileged Exec
Example
Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Console#show upnp
UPnP global settings:
Status: Enabled
Advertise duration: 200
TTL: 20
Console#
Table 4-58 Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-218
spanning-tree mode Configures STP, RSTP or MSTP mode GC 4-219
spanning-tree forward-time Configures the spanning tree bridge forward time GC 4-220
spanning-tree hello-time Configures the spanning tree bridge hello time GC 4-221
spanning-tree max-age Configures the spanning tree bridge maximum age GC 4-221
spanning-tree priority Configures the spanning tree bridge priority GC 4-222
spanning-tree
path-cost method
Configures the path cost method for RSTP/MSTP GC 4-222
spanning-tree
transmission-limit
Configures the transmission limit for RSTP/MSTP GC 4-223
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-223
mst vlan Adds VLANs to a spanning tree instance MST 4-224
mst priority Configures the priority of a spanning tree instance MST 4-225
name Configures the name for the multiple spanning tree MST 4-225
revision Configures the revision number for the multiple spanning
tree
MST 4-226
max-hops Configures the maximum number of hops allowed in the
region before a BPDU is discarded
MST 4-226