Filter
Top Products
System Management Commands
4-29
4
banner configure
This command allows the administrator to interactively specify administrative
information for this device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the
enter key, the script prompts for the next piece of information, and so on, until
all information has been entered. Pressing enter without inputting information
at any prompt during the script’s operation will leave the field empty. Spaces
can be used during script mode because pressing the enter key signifies the
end of data input. The delete and left-arrow keys terminate the script. The use
of the backspace key during script mode is not supported. If, for example, a
mistake is made in the company name, it can be corrected with the banner
configure company command.
banner configure
equipment-location
Configures the Equipment Location information that is displayed
by banner
GC 4-33
banner configure
ip-lan
Configures the IP and LAN information that is displayed by
banner
GC 4-33
banner configure
lp-number
Configures the LP Number information that is displayed by
banner
GC 4-34
banner configure
manager-info
Configures the Manager contact information that is displayed by
banner
GC 4-35
banner configure
mux
Configures the MUX information that is displayed by banner GC 4-35
banner configure
note
Configures miscellaneous information that is displayed by
banner under the Notes heading
GC 4-36
show banner Displays all banner information NE, PE 4-37
Table 4-9 Banner Commands
Command Function Mode Page