Filter
Top Products
Command Line Interface
4-126
4
Default Setting
Disabled
Command Mode
Interface Configuration
Example
network-access link-detection link-down
Use this command to configure the link detection feature to detect and link down
events. When a link down event is detected, the feature can shut down the port,
send an SNMP trap, or both. Use the no form of this command to disable this
feature.
Syntax
network-access link-detection link-down action [shutdown | trap |
trap-and-shutdown]
no network-access link-detection
Default Setting
Disabled
Command Mode
Interface Configuration
Example
network-access link-detection link-up
Use this command to configure the link detection feature to detect link up events.
When a link up event is detected, the feature can shut down the port, send an SNMP
trap, or both. Use the no form of this command to disable this feature.
Syntax
network-access link-detection link-up action [shutdown | trap |
trap-and-shutdown]
no network-access link-detection
Default Setting
Disabled
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-down action trap
Console(config-if)#