Filter
Top Products
Command Line Interface
4-106
4
- tacacs+ - Specifies all TACACS+ hosts configure with the tacacs-server
host command described on page 4-98.
- server-group - Specifies the name of a server group configured with the
aaa group server command described on 4-102. (Range: 1-255
characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
• The accounting of Exec mode commands is only supported by TACACS+
servers.
• Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do
not actually send any information to the server about the methods to use.
Example
aaa accounting update
This command enables the sending of periodic updates to the accounting server.
Use the no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
• Using the command without specifying an interim interval enables updates,
but does not change the current interval setting.
Console(config)#aaa accounting commands 15 default start-stop group
tacacs+
Console(config)#