Filter
Top Products
4 Configuring the system
68
12 Install the chassis cover. For instructions, see “Installing the Chassis
Cover.”
13 (Optional) Install the front bezel. For instructions, see “Removing
and Installing the Front Bezel.”
14 Plug all peripheral devices and the AC power cable back into the
server.
Removing a DVD/CD-RW or CD-ROM Drive from
the Slimline Bay (Backplane Installed)
1 Observe the safety and ESD precautions at the beginning of this
book. See “Safety Information.”
2 Power down the server and unplug all peripheral devices and the
AC power cable.
3 Remove the chassis cover. For instructions, see “Removing the
Chassis Cover.”
4 Remove the front bezel if it is installed.
5 Disconnect the CD-ROM data cable from the backplane.
6 Push in on the blue lever at the rear of the drive carrier. Slide the
drive carrier out through the front of the chassis.
7 Press downward on the side of the carrier release the drive from
the drive carrier.
A
B