Filter
Top Products
4 Configuring the system
76
Installing and Removing a PCI Add-in
Card
Installing a PCI Add-in Card
In the slots provided by the PCI riser connector, you can install either
one or two add-in cards. Use the following instructions to install an
add-in card.
1 Observe the safety and ESD precautions at the beginning of this
book. See “Safety Information.”
2 Power down the server and unplug all peripheral devices and the
AC power cable.
3 Remove the chassis cover. For instructions, see “Removing the
Chassis Cover.”
4 Pull up on the two latches on the assembly. See letter “A” in the
figure below.
5 Lift the PCI riser assembly from the chassis.
6 Open the PCI retention clip on the PCI riser card assembly. See
letter “A” in the figure below.
7 Remove the filler panel at the back of the riser assembly. See letter
“B” in the figure below.